application: safety approvals: electrical characteristics: environmental to operating temperature ts storage temperature hr ho storage humidity operating humidity pd derate linearly from 100% load at 50c to 50% load at 70c mtbf operating temperature at 25 c alculated per mil-hdbk-217f , -40~85c 0~95% 0~95% 0.1m hrs (min.) see derating curve vin safety approvals input voltage range operate voltage range 100~240vac 90~260vac fin po vo io iil iih ir input frequency output power range see rating chart see rating chart see rating chart output voltage range output current range input current (low line) io=full load, vin=100vac io=full load, vin=240vac io=full load, 25 c, cool start, vin=115vac io=full load, 25c, cool start, vin=230vac input current (high line) low line inrush current high line inrush current 2.0a (max.) 2.0a (max.) 47~63hz 54a (max.) 108a (max.) 85~90% eff reg-i reg-o ovp ocp ttr th ts vp-p ilk tc io=full load, vin=230vac io=full load vin=230vac over current protection over voltage protection io=full load, vin=110vac io=full load, vin=100vac full load, vin=90vac io=full load to half load, vin=100vac vin=240vac/60hz all output efficiency line regulation load regulation over voltage protection over current protection time of transient response hold-up time start up time temperature coefficient ripple & noise(peak to peak) safety ground leakage current 0.04%/c 3s (max.) 16ms (min.) 0.5~1% 0.75ma (max.) 1% (max.) 2~5% 112~132% 110~150% 4ms (max.) pno see rating chart no load, vin=230vac no-load power consumption vps 4242vdc (min.) primary to secondary dielectric withstanding voltage for primary to secondary vpg ris 2837vdc (min.) primary to pe test voltage=500vdc dielectric withstanding voltage for primary to pe isolation resistance 50m (min.) pf power factor correction 0.95~1 io=full load, vin=240vac - industrial pc - electrical test & measurement instruments - communication equipment - av equipment features: wide operating voltage 90 to 260 vac,47 to 63 hz internal emi filter single output active power factor correction power fail detect (optional) synchronous rectification operating temperature -20~70c class i 3 year warranty tpibu151 series 150w open frame type industrial power supplies cb rohs 2002/95/ec compliant bauart type approved gepruft ul/c-ul(ul 60950-1:2nd edition) tuv/gs(en 60950-1:2nd edition) total power international, inc toll free: 877-646-0900 www.total-power.com totatotal power international, inc.
output voltage and current rating chart ( single output ) : derating cruve : model number output voltage output current total regulation . max output power pno (max.) mechanical specifications: note: 1. dimensions are shown in mm. 2. 3. input connector mates with molex housing 09-52-4034 and molex 2478 series crimp terminal. 4. output connector mates with molex housing 09-52-4134 and molex 2478 series crimp terminal. weight: 390gs approx. 1. operating temperature: -20 to 70c 2. derate linearly from 100% load at 50c to 50% load at 70c 0% -20 0 10 20 30 40 50 60 70 80 20% 40% 60% 80% 100% 120% temperature (deg c) output watts (%) out out out out out out rtn rtn rtn rtn pfd rtn rtn tpibu151-1xx pin model pin chart 1 2 3 4 5 6 7 8 9 10 11 12 13 tpibu151 series tpibu151-104 5% 144w 3w 3w 3.5w 3.5w 3w 3w 3w 3w tpibu151-105 5% 150w tpibu151-106 5% 150w tpibu151-107 4% 150w tpibu151-108 3% 150w tpibu151-109 2% 150w tpibu151-110 2% 150w tpibu151-111 2% 150w 16.0 a 12.5 a 10.0 a 8.33 a 6.25 a 5.00 a 4.17 a 3.13 a 9 vdc 12 vdc 15 vdc 18 vdc 24 vdc 30 vdc 36 vdc 48 vdc (optional) 150w open frame type industrial power supplies total power international, inc toll free: 877-646-0900 www.total-power.com totatotal power international, inc.
|
